215 found, showing page 4 of 6
*1/4X1/8 BRASS COUPLING
Low lead threaded reducing coupling. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Low lead threaded reducing coupling. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4x3/8 BRASS BUSHING
Low lead red brass standard bushing. Female iron pipe x Male iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Low lead red brass standard bushing. Female iron pipe x Male iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*1" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*3/4" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*3/8" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*1/4" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*1/8" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*3/8" BRASS UNION
Low lead union. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Low lead union. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*1/4" BRASS UNION
Low lead union. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Low lead union. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*1/8" BRASS UNION
Low lead union. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Low lead union. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1-1/4" 90D BRASS ELBOW
90 deg. low lead solid threaded elbow. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
90 deg. low lead solid threaded elbow. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*3/4X1/2 BRASS BUSHING
Low lead 3/4" Female iron pipe x 1/2" Male iron pipe. Used to convert tub spouts with 3/4" F.I.P. inlet to 1/2" F.I.P. inlet. Rough brass. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Low lead 3/4" Female iron pipe x 1/2" Male iron pipe. Used to convert tub spouts with 3/4" F.I.P. inlet to 1/2" F.I.P. inlet. Rough brass. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*1/2X3/8 BRASS BUSHING
Low lead red brass face bushing. 1/2" Female iron pipe x 3/8" Male iron pipe. Rough brass. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Low lead red brass face bushing. 1/2" Female iron pipe x 3/8" Male iron pipe. Rough brass. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
12"SB WTR HTR CONNECTOR
SharkBite x FIP, braided flexible water heater connector. SharkBite's braided flexible water heater connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection of the connector to the nipple and tighten with channellocks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve. Approvals: ASME A112.18.6-2009/CSA B125/6-200 & NSF/ANSI 372-2010 & NSF/ANSI 61.
View Details
SharkBite x FIP, braided flexible water heater connector. SharkBite's braided flexible water heater connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection of the connector to the nipple and tighten with channellocks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve. Approvals: ASME A112.18.6-2009/CSA B125/6-200 & NSF/ANSI 372-2010 & NSF/ANSI 61.
15"SB WTR HTR CONNECTOR
SharkBite x FIP, braided flexible water heater connector. SharkBite's braided flexible water heater connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection of the connector to the nipple and tighten with channellocks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve. Approvals: ASME A112.18.6-2009/CSA B125/6-200 & NSF/ANSI 372-2010 & NSF/ANSI 61.
View Details
SharkBite x FIP, braided flexible water heater connector. SharkBite's braided flexible water heater connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection of the connector to the nipple and tighten with channellocks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve. Approvals: ASME A112.18.6-2009/CSA B125/6-200 & NSF/ANSI 372-2010 & NSF/ANSI 61.
18"SB WTR HTR CONNECTOR
SharkBite x FIP, braided flexible water heater connector. SharkBite's braided flexible water heater connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection of the connector to the nipple and tighten with channellocks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve. Approvals: ASME A112.18.6-2009/CSA B125/6-200 & NSF/ANSI 372-2010 & NSF/ANSI 61.
View Details
SharkBite x FIP, braided flexible water heater connector. SharkBite's braided flexible water heater connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection of the connector to the nipple and tighten with channellocks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve. Approvals: ASME A112.18.6-2009/CSA B125/6-200 & NSF/ANSI 372-2010 & NSF/ANSI 61.
24"SB WTR HTR CONNECTOR
SharkBite x FIP, braided flexible water heater connector. SharkBite's braided flexible water heater connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection of the connector to the nipple and tighten with channellocks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve. Approvals: ASME A112.18.6-2009/CSA B125/6-200 & NSF/ANSI 372-2010 & NSF/ANSI 61.
View Details
SharkBite x FIP, braided flexible water heater connector. SharkBite's braided flexible water heater connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection of the connector to the nipple and tighten with channellocks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve. Approvals: ASME A112.18.6-2009/CSA B125/6-200 & NSF/ANSI 372-2010 & NSF/ANSI 61.
*SHARK ADAPTER 1/2X3/4F
Female iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Female iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2x3/4M SHARK ADAPTER
Push fittings are the fastest, easiest way to join copper, CTS, CPVC, and Pex in any combination. No soldering or glue. Certified to 200 P.S.I. and 200 deg. F. Low lead. 1/2" x 3/4" MPT
View Details
Push fittings are the fastest, easiest way to join copper, CTS, CPVC, and Pex in any combination. No soldering or glue. Certified to 200 P.S.I. and 200 deg. F. Low lead. 1/2" x 3/4" MPT
S/S CLOSET FLANGE RING
Stainless steel ring is corrosion-resistant. Perfect for repairs to damaged closet flanges, or new concrete floor installations. Fits securely over damaged flanges.
View Details
Stainless steel ring is corrosion-resistant. Perfect for repairs to damaged closet flanges, or new concrete floor installations. Fits securely over damaged flanges.
3/4" PUSH CAP
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
View Details
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
1/2" PUSH CAP
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
View Details
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
3/4X1/2X1/2 PUSH TEE
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2" PUSH TEE
Brass push fitting - no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with disconnect clip) and reuseable. Product is individually bagged.
View Details
Brass push fitting - no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with disconnect clip) and reuseable. Product is individually bagged.
*1/2 SHARK DROP EAR ELBOW
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F, 200 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reusable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F, 200 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reusable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" PUSH RPR COUPLING
Repair copper pipe easily. 1 end of coupling does not have a stop, which allows you to slide coupling on to pipe and then slide back to cover where pipe is cut out. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Repair copper pipe easily. 1 end of coupling does not have a stop, which allows you to slide coupling on to pipe and then slide back to cover where pipe is cut out. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2" PUSH RPR COUPLING
Repair copper pipe easily. 1 end of coupling does not have a stop, which allows you to slide coupling on to pipe and then slide back to cover where pipe is cut out. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Repair copper pipe easily. 1 end of coupling does not have a stop, which allows you to slide coupling on to pipe and then slide back to cover where pipe is cut out. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" PUSH ELBOW
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2" PUSH ELBOW
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" MIP PUSH ADAPTER
Male iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Male iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2" MIP PUSH ADAPTER
Male iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Male iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" FIP PUSH ADAPTER
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Female iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
View Details
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Female iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
1/2" FIP PUSH ADAPTER
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Female iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
View Details
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250 psi pressure rating. Female iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F, 250 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces. Third-party listed, compliant with applicable U.S. and Canadian plumbing codes. 25-year warranty when properly installed on PEX, copper, CPVC and PE-RT. Five-year warranty when properly installed with HDPE SDR-9. Patented technology.
1/2x3/4 PUSH COUPLING
Reducing coupling. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Reducing coupling. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" PUSH COUPLING
Coupling. Brass push fitting - no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. It is made of 1-piece DZR brass. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F (degree Fahrenheit), 200 psi. Designed for potable water and radiant heating. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged.
View Details
Coupling. Brass push fitting - no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. It is made of 1-piece DZR brass. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F (degree Fahrenheit), 200 psi. Designed for potable water and radiant heating. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged.
1/2" PUSH COUPLING
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250-psi pressure rating. The re-engineered body allows you to insert the pipe using less effort and doesnt require a PEX tube liner. No soldering, clamps, unions, glue, or special tools are required forinstallation. They are the fastest way to connect PEX, copper, CPVC, PE-RT and HDPE pipe. The fitting can be rotated after installation for quick adjustments, and removing the fitting is just as fast with a disconnect tool, allowing fittings and valves to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.)
View Details
SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 250-psi pressure rating. The re-engineered body allows you to insert the pipe using less effort and doesnt require a PEX tube liner. No soldering, clamps, unions, glue, or special tools are required forinstallation. They are the fastest way to connect PEX, copper, CPVC, PE-RT and HDPE pipe. The fitting can be rotated after installation for quick adjustments, and removing the fitting is just as fast with a disconnect tool, allowing fittings and valves to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.)
1/2" PUSH BALL VALVE
Brass ball valve with push fitting connections. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable.
View Details
Brass ball valve with push fitting connections. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable.
3/4" PUSH BALL VALVE
Brass ball valve with push fitting connections. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable.
View Details
Brass ball valve with push fitting connections. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable.
1/8X1-1/2 GALV NIPPLE
Welded steel pipe. Hot dipped galvanized, meets ASTM A/53 standards. Schedule 40, standard pipe. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Welded steel pipe. Hot dipped galvanized, meets ASTM A/53 standards. Schedule 40, standard pipe. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
